Filter
Top Products
8.2 Changing the receiver PIN code
The receiver PIN code is set at the factory to 0000.
To change the receiver PIN code proceed as follows:
> Use the Menu key to call up the Main Menu.
> Use the arrow keys up/down to mark the line
Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed.
> Use the arrow keys up/down to mark the line
Change Receiver PIN.
> Confirm by pressing OK.
> Use the numeric keys to enter the current receiver
PIN code (Default setting 0000)
(Fig. 8-7).
> Use the numeric keys to enter the desired new
receiver PIN code.
> Repeat the entry of the code.
> When you have changed the receiver PIN code as
described here, press the Menu key to return to nor-
mal operation.
Note! Ensure that you do not forget the receiver
PIN code. If you do forget it, please consult your
specialist retailer!
8.3 Searching for programmes
As mentioned previously, your digital receiver is pre-pro-
grammed for reception of the ASTRA and EUTELSAT satelli-
tes. To receive new programmes, or programmes broadcast
by other satellites, there are various options of conducting a
programme search.
1. Automatic Search
Select this type of search to scan all satellites selected in the
menu LNC Settings (Point 6.4 and 8.4) for programmes.
2. Satellite Search
Select this type of search to search only a specific satellite
for programmes.
3. Transponder Search
Select this type of search to scan a specific transponder on a
satelite.
4. Manual Search
Select this type of search if you want to search for a specific
programme using programme-specific PID numbers.
When the search has been completed, a message will be
displayed on your screen indicating how many programmes
your digital receiver has found, how many of these are new,
and how many programmes are encrypted. New programmes
are stored in the Complete list, and can be transferred to the
Favourites list as described in Point 8.1.
45
(Fig. 8-7)
(Fig. 8-8)
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:14 Seite 45