Dolby Laboratories Digital-Satellite-Receiver Satellite TV System User Manual


 
PLL Modulator:* UHF, Channel 21 ... 69
Antenna input 47 ... 862 MHz
Antenna output 47 ... 862 MHz
Video decoding:
Video compression MPEG-2 and MPEG-1 compatible
Up to MP@ML (main profile @
main level)
Video standard PAL / 25 Hz
Active screen area 720 pixels x 576 lines
Picture format 4 : 3 / 16 : 9
Picture material 16:9 Automatic adaptation for 16:9 TV
sets (via SCART)
Letterbox filtering for 4:3 TV sets
Audio decoding:
Audio compression MPEG-1 & MPEG-2 Layer I and
II
Audio Mode Dual (main/sub), Stereo
Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz
Audio Parameters:
Output analogue:
Output level L/R 0,5 V r.m.s. (nominal)
Output impedance 600 Ohms
THD > 60 dB ( 1 kHz )
S/N > 60 dB
Crosstalk < - 65 dB
Input analogue:
Input level l/r 0,5 V r.m.s. (nominal)
Input impedance > 40 kOhms
Volume on operating Automatic use of last volume level
set
Output digital:
SP/DIF output electrical, cinch socket
optical*, Toslink
Video Parameters:
Input:
Input level CVBS 1 Vs-s +/- 0.3 dB into 75 Ohms
Input level RED 0,7 Vs-s +/- 0.1Vp-p into 75 Ohms
Input level GREEN 0,7 Vs-s +/- 0.1Vp-p into 75 Ohms
Input level BLUE 0,7 Vs-s +/- 0.1Vp-p to 75 Ohms
Teletext filtering corresp. to ETS 300 472 standard
Scanning teletext data (CVBS) corresp. to ITU-R BT.653-
2 lines: 6-22 and 320-335
TV SCART:
Output: CVBS or RGB
VCR SCART:
Input: CVBS
Output: CVBS
62
* Only for receivers equipped with
this feature
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:15 Seite 62