Emerson 400276-01 Universal Remote User Manual


 
7
Installation
NOTE: The use of a flexible coupling is required between the encoder
and the motor shaft.
Figure 6 Encoder, Model SDC-25-1, 1024 Line Density
NOTE: The use of a flexible coupling is required between the encoder
and the motor shaft.
Encoder Sine Wave Signals
A graphic illustration of the encoder signals from either the SDC-15-1 or SDC-25-1
is shown below.
Figure 7 Typical Encoder Signals - Sine Wave Output
A line on an encoder would be 360° of signal change of either A or B.