Filter
Top Products
28
525 Programmable Motion Controller
Input and Output Functions
The basic drive can be configured from a list of 21 input functions and 10 output
functions. When a IOM/PCM module is added the number of available I/O functions
is increased.
NOTE: For detailed description of I/O functions see PCX
PROGRAMMING MANUAL P/N 400240-01.
Figure 31 Input and Output Wiring, Sinking and Sourcing
NOTE: 18 to 24 gauge wire should be used for I/O wiring. The use of
larger gauge wire will cause the I/O terminals to prematurely
fatigue. DC common should be grounded to the single point
ground.
NOTE: The DC Common of the I/O power supply must be grounded to
the safety ground.