Filter
Top Products
General A016-1CG-1.00-2
Full
13
Chapter 7: Configuring the C3000/C0300
DPA A016_DI Table
This chapter describes entries the user must provide in the A016_DI table found in the
C3000/C0300 DPA configuration.
The A016_DI table provides information for system status input points, which are used by the
C3000/C0300 DPA. The table contains one record for each system status input point to
customize the usage of the point. The fields contained in the table are described in the following
table:
Field Range Description
DI Point
Any valid system Digital
Input point or Undefined (-1).
The system status input point number, which is used as one of the sources
for a scan section. The high entry limit is confined to the highest system
status input point configured in the system. Entering Undefined (-1)
causes the LRU to always return a constant value for this point as it is not
mapped to a real system status input point.
Invert
Yes or No
Indicates if the System Status point value should be inverted by the DPA.
SOE Enable
Yes or No
Indicates if the System Status point should be logged in the SOE buffer
(SOE enabled) or not (SOE disabled).
Table 8 A016_DI Table Fields