Filter
Top Products
GE Power Systems
Custom ABB C3000/C0300 DPA
Configuration Guide
A016-1CG-1.00-2 General
46
Full
A.2 Warning Messages
The following warning messages are caused by errors within WIN, pSOS, or other function
calls within the application. If you encounter one of these messages, note the exact text of the
displayed message and contact the GE Power Systems Customer Service Department to report the
problem.
• WARNING, WIN DPA CLOSE FAILED, STATUS = <xx>
• WARNING, DPA READY COMMAND FAILED
• WARNING, CAN'T ENABLE RX ON PORT <xx>, ERR = <xx>
• WARNING, SIO_CN_RX_HIT ERR = <xx>
• WARNING, CAN'T DISABLE RX ON PORT <xx>, ERR = <xx>
• WARNING, RUN TIME ERROR, PORT <xx> TX WRITE ERR = <xx>
• WARNING, RUN TIME ERROR, PORT <xx>, CAN'T CHANGE RTS OFF DELAY
• WARNING, RUN TIME ERROR, SEND_X, ERR = <xx>
• WARNING, RUN TIME ERROR, WIN WRITE, ERR = <xx>
• WARNING, RUN TIME ERROR, RX'D NACK FOR CONTROL REQUEST
• WARNING, RUN TIME ERROR, RX'D NACK FOR ACCUM REQUEST
• WARNING, RUN TIME ERROR, SIGNAL_V, ERR = <xx>
• WARNING, RUN TIME ERROR, CANNOT ALLOCATE RAM
• WARNING, RUN TIME ERROR, SET TX DELAY, ERR = <xx>
• WARNING, RUN TIME ERROR, GET RX TIME, ERR = <xx>
• WARNING, UNABLE TO RESET SYSTEM