Filter
Top Products
Front Page 2-7
◆ Status — displays the status of all user-configurable options.
Press { (Page) to scroll between pages. To change an
option, go to the Printer Configuration section of the menu.
◆ Advance Media — press the p key to advance the media for-
ward. When you press and hold the p key, the media moves
faster. You can also press the Media Advance switch on the
rear of the printer, below the left profiler docking station, to
advance the media. Press the C key to advance the media
back onto the supply spool. When you press and hold the C
key, the media moves faster.
◆ Menu — displays the complete printer menu for access to
advanced configuration options (see “Menu” on page 2-10
for instructions).
◆ AutoSet — performs a “one touch” calibration of the printer:
bidirectional and head-to-head alignment of printheads, and
AutoJet substitution mapping of deflected or missing jets.
See “AutoSet” on page 4-2 for instructions.
◆ Prime Bars — fires all jets by drawing a set of lines called
prime bars. This is a good way to inspect and prepare the
jets for printing after they have been idle for more than a few
hours. Choose Quick Prime Bars for most primes, or
Detailed Prime Bars when you want to locate individual
missing jets that AutoSet may have missed, so you can map
them manually under Calibrate Printer - Manual Calibra-
tions - Manual Jet Mapping (see “Manual Jet Mapping” on
page 4-13 for instructions).
Fig. 2-4. Status page 1