Filter
Top Products
Loading Media 3-31
Dryer Operation As the printed output advances past the dryer outlets, the dryer
blows air over the output to dry it. The print will continue to
advance until the trailing edge of the print has passed under the
dryer. The print remains stationary for twenty seconds, then will
reverse or advance according to the supply loop option selected
(see page 2-14). To cancel the twenty-second delay, press the n
(Cancel) key.
The printer’s relative humidity sensor enables the printer to
adjust the media advance speed to ensure adequate drying.
Higher relative humidity will result in slower printing. You can
customize this feature from the control panel; for instructions,
see page 2-12.
Caution
Output on polyester films can be streaked by the
dryer air flow. To avoid this, you can disable the
dryer fan from the control panel. For instructions,
see “Printer Options” on page 2-13.
Relative
Humidity Printer Action
0–29% Low humidity warning displayed, jets may drop out
and media may lift from the platen
30–59% Optimal, no warning or drying delay
60–79% High humidity warning displayed, media advance is
delayed automatically as humidity increases
> 80%
Action displayed, printing stops. User must specify a
manual drying delay to proceed with printing (see
Drying Delay under “Print Settings” on page 2-11)