Filter
Top Products
3-26 Loading Media
9. On the Front Page screen of the control panel, press the Load
Media key.
The control panel prompts you to press the B key to load
media, or n to cancel.
10. Press the B key to proceed.
The control panel prompts you to advance the media.
11 . P r e s s t h e p key to advance the media past the front edge of
the platen.
12. Press t he B key to proceed.
This causes the printer to measure the width of the media.
The control panel displays a numeric keypad.
13. Enter the length of the media roll (if it is a new roll) or the
length remaining (if it is a partially used roll), and press the
Enter key to continue.
To skip this step, press Esc or Enter without entering a value.
The printer will not track the amount of media remaining
on the roll, and it will be unable to display a warning when
the amount of media runs low. The media length will dis-
play as “undefined.”
Fig. 3-15. Numeric entry screen