Filter
Top Products
2-8 Front Page
◆ Print Mode — interactively assists you in installing print-
heads in the correct positions, and setting the number of
print passes. See “Selecting a Print Mode” on page 3-7 for
instructions.
◆ Carriage — moves the carriage out of the service station so
you can load or clean the printheads and ink tubes, clean the
image sensors, and remove the service station.
◆ Prime — moves the printhead carriage to the priming posi-
tion, so that one or more printheads can be manually
primed (see “Manual Priming” on page 5-8 for instructions).
◆ Media Unload — when unloading media, prints the calcu-
lated amount of media remaining on the roll for reference
(on the lower right edge). If using the takeup, cut the media
from the takeup spool before pressing the Media Unload key
(see “Cutting and Unloading Media” on page 3-32). When
removing the partial roll from storage and re-loading on the
printer, the user can report this value to the printer during
the Media Load operation.
◆ Media Load — causes the printer to measure width of the
media installed in the printer, checks for proper media posi-
tioning on the platen (for good vacuum contact), asks the
user to enter the amount remaining on the supply roll, asks
the user to select a takeup option. See “Loading Media” on
page 3-24 for instructions.
◆ ATTN (Attention) — blinks on the control panel when the
printer detects an error condition, potential error condition,
or when you make a change that requires recalibration or
other action to ensure best print quality. See “User Assis-
tance” on page 2-3 for further details.