Filter
Top Products
Installing the Server Blade and Options
To access internal server blade components:
IMPORTANT: If the server blade is not installed in the server blade enclosure, begin with
step 4.
1. Identify the proper server blade in the server blade enclosure.
2. Remove power from the server blade in one of the following ways:
— Use the virtual power button feature of iLO to power down the server blade
from a remote location. Be sure that the server blade is in standby mode by
observing that the power LED is amber. For iLO information and procedures,
refer to Chapter 2, “Configuring and Deploying Server Blades,” or to the HP
Integrated Lights-Out User Guide on the Documentation CD.
— Press the Power On/Standby button on the front of the server blade. Be sure
that the server blade is in standby mode by observing that the power LED is
amber.
Figure 1-1: Pressing the Power On/Standby button
HP ProLiant BL40p Server Blade Setup and Installation Guide 1-3
HP CONFIDENTIAL
Writer: Amy Clute File Name: b-ch1 Installing the Server Blade and Options.doc
Codename: Black Ice Part Number: 307153-002 Last Saved On: 11/11/03 2:29 PM