Filter
Top Products
Installing the Server Blade and Options
1. Four server blade blanks must be removed before installing a BL40p server blade
into the enclosure. To remove a server blade blank:
a. Press the release buttons (1).
b. Slide the server blade blank out of the bay (2).
Figure 1-27: Removing a server blade blank
NOTE: Store the server blade blank for future use.
2. Repeat step 1 to remove the three other server blade blanks from adjacent bays.
3. Align the keyed end of the server blade with the guide at the end of a bay on the
server blade enclosure.
IMPORTANT: The server blade is keyed to fit only one way in the bay. If the server blade
does not slide easily into the bay, be sure that the server blade is oriented properly.
1-34 HP ProLiant BL40p Server Blade Setup and Installation Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: b-ch1 Installing the Server Blade and Options.doc
Codename: Black Ice Part Number: 307153-002 Last Saved On: 11/11/03 2:29 PM