Filter
Top Products
Configuring and Deploying Server Blades
1. Connect the I/O cable to the server blade (1).
2. Connect a monitor to the video connector (2).
3. Connect a USB hub to a USB connector (3).
4. Connect the following to the USB hub:
a. USB CD-ROM (4) and/or a USB diskette drive
b. USB keyboard (5)
c. USB mouse (6)
NOTE: HP recommends the use of a USB hub when connecting a USB diskette drive and/or
USB CD-ROM drive to the server blade. This will provide more available connections.
Figure 2-6: Directly connecting to the server blade
using a USB hub
USB CD-ROM Deployment
CD-ROM deployment involves a bootable CD that executes a script that configures
the hardware and installs the operating system.
2-10 HP ProLiant BL40p Server Blade Setup and Installation Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: c-ch2 Configuring and Deploying Server Blades.doc
Codename: Black Ice Part Number: 307153-002 Last Saved On: 11/11/03 2:31 PM