Filter
Top Products
Installing the Server Blade and Options
5. Disconnect the RJ-45 cables from the PCI-X mezzanine board.
Figure 1-7: Disconnecting RJ-45 cables
6. Disconnect the SCSI I2C cable from the SCSI backplane board, and snap the
cable into the processor baffle. Refer to Figure 1-8 and Figure 1-9.
CAUTION: The SCSI I2C cable must remain attached to the system board. To
avoid damaging the system board, remove only the end connected to the SCSI
backplane board.
1-10 HP ProLiant BL40p Server Blade Setup and Installation Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: b-ch1 Installing the Server Blade and Options.doc
Codename: Black Ice Part Number: 307153-002 Last Saved On: 11/11/03 2:29 PM