Filter
Top Products
Installing the Server Blade and Options
Table 1-1: Component Disconnection Tasks continued
Item Component Task
3 DC power converter Disconnect from system board
4 RJ-45 cables Disconnect from PCI-X mezzanine board
5 SCSI I2C cable Disconnect from SCSI backplane board
and snap into the processor baffle
6 SCSI backplane power cable Disconnect from SCSI backplane board
and snap into the processor baffle
7 SCSI cables Disconnect from system board and SCSI
backplane board
To remove the system board tray assembly:
IMPORTANT: All power must be removed from the server blade before performing these
procedures.
1. Remove the access panel. Refer to Figure 1-4.
2. Remove any installed PCI-X expansion boards.
1-8 HP ProLiant BL40p Server Blade Setup and Installation Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: b-ch1 Installing the Server Blade and Options.doc
Codename: Black Ice Part Number: 307153-002 Last Saved On: 11/11/03 2:29 PM