Filter
Top Products
Configuring and Deploying Server Blades
To navigate RBSU, use the following keys:
•
•
•
To access RBSU, use the iLO Remote Console and press the F9 key when
prompted during power up.
To navigate the menu system, use the arrow keys.
To make selections, press the Enter key.
RBSU automatically saves settings when you press the Enter key. The utility does
not prompt you for confirmation of settings before you exit the utility. To change a
selected setting, you must select a different setting and press the Enter key.
Table 2-2 contains the default settings for options in primary RBSU menus.
Table 2-2: RBSU Default Settings
Menu/Option Default Setting
System Options
OS Selection Windows 2000
Serial Number
Embedded NIC Port 1 PXE Support Enabled
Standard Boot Order (IPL) *
Automatic Server Recovery
ASR Status Enabled
ASR Timeout 10 minutes
Thermal Shutdown Enabled
Server Passwords
Set Power-On Password Disabled
Set Admin Password Disabled
* The default boot order is CD-ROM drive, diskette drive, hard
drive, and network, respectively.
continued
2-22 HP ProLiant BL40p Server Blade Setup and Installation Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: c-ch2 Configuring and Deploying Server Blades.doc
Codename: Black Ice Part Number: 307153-002 Last Saved On: 11/11/03 2:31 PM