Filter
Top Products
Rev 1.00 11 Document 900.0399
09/05
Initial Setup
Before using your DVR for the first time, you should establish some initial settings (for
example, date and time, display language, camera settings, recording mode and
scheduling, and your network setup). The following sections describe how to use the Setup
menus to quickly set up your DVR.
1. Press SETUP on the front panel to enter the Setup menu.
2. At the prompt, enter your password using the appropriate combination of arrow
buttons. The default password is 1111. Press SEL to enter the password.
3. After the password is entered you will see the main Setup menu screen as shown in
Figure 3-2. Use the arrow buttons to navigate through the menu items. Press SEL to
enter the desired sub-menu.
We recommend that you protect your DVR system by assigning a new password
immediately. Please follow the procedure in Setting System Parameters, page 16.
Figure 3-2 Setup Menu Screen
Menu Structure
The Setup menu structure is as follows:
Live Mode
To set values for live video display, use the UP and DOWN controls to navigate through the
menu items. Change the value of the menu item using the LEFT and RIGHT controls.
Setup Menu
Set Date & Time
PTZ Control
Network Password
Admin Password
Description
DVR ID
Record System
Mail Server IP
Mail Address
DDNS Server Name
DNS Server IP
Subnet Mask
Gateway
IP
Port
Network Storage Save SetupLive
Motion Zone
Schedule
Channel
Name