Rev 2.00 43 Document 900.0399
03/06
Click to Unlock all the operations on the DVR.
Note When this button is clicked it changes to the
Lock button.
When you click the Lock or Unlock button, the
password entry window appears. When you Lock the
operations on the DVR, you need to set and enter the
Password. When you Unlock the operations on the
DVR, you need to enter the Password previously set
while locking. The factory default password is the
enter key on your PC. Press Enter.
This Remote Site information panel shows the DVR
site RAS is currently connected to, and the
corresponding channel information.
Click to Resume live video updates.
Click to Freeze live video updates.
Enable or disable the recording of live video for future
playback by the RAS Viewer program. The video is
saved to c://Storage/ on the local PC disk,
specified in RAS Setup, Capture. This option allows
saving and playback of all cameras at the same time.
Click to Save a Still image. Only the selected red
outlined camera will be saved.
When you click the Save Still button, this window
appears, offering you image capturing options. The
still image can be captured in either jpeg or bmp file
format. The image will be saved in the folder selected
on the General Setup screen (see General Setup on
page 49) unless you specify otherwise. You can also
change the default File Name for the still image.
Click to Setup the configuration of the RAS program.
Click to Exit from the operations of the RAS program.
These Alarm indicators illuminate when a sensor input
is active on the corresponding channel on the remote
HRDE4X4.
Click to view the red outlined video channel in Full
Screen view.
Table 6-1 Live Viewing Interface Controls (Cont’d)
Interface Control Description
