Filter
Top Products
Rev 1.00 16 Document 900.0399
09/05
Setting System Parameters
Use the System Setup screen to input system parameters.
Use the UP and DOWN arrow controls to navigate through the menu items and use the
LEFT and RIGHT arrow controls to change the value of the menu items.
Figure 3-7 System Setup Screen
Follow Table 3-7 to set global System parameters.
Table 3-6 Schedule Recording Setup Fields
Field Description
ALL Selected recording mode is applied to the entire time zone and all
channels (cameras 1 to 4).
CH1 to CH4 Selected recording mode is applied to the entire time zone for the
specified channel.
Vertical Bar Selected recording mode is applied to the entire channel for the
selected time zone.
Each vertical bar corresponds to one hour.
- Individual Block of
Time
Selected recording mode is applied to the selected 1-hour
increment for the selected channel.
Table 3-7 System Setup Fields
Field Description
DVR ID Set the name of the DVR (see Figure 3-8).
Press SEL, use the LEFT and RIGHT arrow controls to navigate
through the position for each alphanumeric character. Use the UP
and DOWN arrow controls to change the selected character. Press
SEL to confirm the name.
DESCRIPTION Press SEL to view system information (System version, storage
capacity, IP address and MAC address. See Figure 3-9).
LOAD SETUP
DEFAULT
Select ON to reset the system to the factory default settings.