Filter
Top Products
Rev 1.00 12 Document 900.0399
09/05
Figure 3-3 Live Mode Setup Screen
Follow Table 3-3 to set the Live Mode parameters.
Table 3-3 Live Mode Setup Fields
Field Description
OSD Enable/disable on-screen display.
SEQUENCE Enable/disable sequential display of video in Full Screen mode.
SEQ-DWELL TIME Set the Dwell time for each channel display in Sequential Display
mode (choose from 1–60 seconds).
SCREEN
CROPPING
Enable/disable cropping to make the display fit the screen.
TRANSPARENT Change the transparency level of the on-screen display.
CHANNEL Select the channel (camera 1–4) for applying the six following
settings. Any changes you make will immediately take effect with
the selected channel.
Press SEL to enter a text insertion screen and apply a new name
for the channel. Use the LEFT and RIGHT arrow controls to
navigate through the channel name and the UP and DOWN arrow
controls to change the selected character. Press SEL to confirm
the name.
DISPLAY Enable/disable display of the video channel in Live Display mode.
SEQ LIST Enable/disable the specified channel to be included in the
Sequential Display mode.
BRIGHTNESS Change the brightness value for the specified channel.
CONTRAST Change the contrast value for the specified channel.
HUE Change the hue value for the specified channel.
SATURATION Change the saturation value for the specified channel.