Filter
Top Products
Rev 1.00 27 Document 900.0399
09/05
Figure 4-6 Time-line Search Screen
4. Select All or a specific channel to search by using the UP and DOWN arrow buttons.
Notice that the highlighted icon on the lower left side of the screen changes when UP
or DOWN is pressed.
5. Once you select the channel, use the LEFT and RIGHT arrow buttons to move the
time line select Bar (yellow) to the point on the 60 minute time table that you wish to
start playing the video clip (time zones with recorded video are indicated by a red
underline).
6. Press SEL to playback the recorded video.
7. Press ARCH to launch the archiving function in playback mode (see Archiving Video
on page 32 for more information).
Go To Search
You can search for video data from a specific instance by setting the date and time in the
GO TO search window (see Figure 4-7). Use the LEFT or RIGHT arrow buttons to move
through the date and time values in this menu. Use the UP and DOWN arrows buttons to
change the date and time values. Press SEL when the appropriate date and time is entered
to playback the recorded video.
Figure 4-7 Go To Search Screen