Filter
Top Products
16
Picture Features
Display MENU.
Choose PICTURE FEATURES.
Display the Picture Features menu.
When you set the Digital VNR to ON, you can reduce the
noise on the screen to improve picture quality further.
Press to choose DIGITAL VNR.
Press to choose ON.
• To cancel the Digital VNR, choose OFF.
Press .
This completes the setting.
When the DigiPure is set to ON, optimum edge compensation
is applied to each portion of the same picture through digital
edge compensation. Thus, Clear and natural looking images
are obtained.
Press to choose DigiPure.
Press to choose ON.
• To cancel the DigiPure, choose OFF.
Press .
This completes the setting.
The colour system is automatically chosen, but if the picture
is not clear or no colour appears, choose the colour system
manually.
Press to choose COLOUR SYSTEM. Then
Press
.
.
Press to choose the appropriate colour
system.
PAL:
PAL system.
SECAM:
SECAM system.
NTSC3.58:
NTSC 3.58 MHz system.
NTSC4.43:
NTSC 4.43 MHz system.
AUTO:
Automatic colour system selection.
Press .
This completes the setting.
Digital VNR
DigiPure
Notes:
• Set the DigiPure to ON normally.
• The DigiPure setting can be changed using the buttons
on the TV's front panel. Pressing the button for 5
seconds or longer causes the current DigiPure setting to
be displayed. Change the DigiPure setting while it is be-
ing displayed using the - / + buttons.
MENU
DIGITAL VNR
DigiPure
COLOUR SYSTEM
PICTURE FEATURES
OFF
ON
OFF
ON
TV OK
1
OK
MENU
2
P
P
3
OK
MENU
1
/
2
/
3
OK
1
/
2
/
3
OK
Colour System
Notes:
• The AUTO may not function properly with poor sig-
nal quality. If the picture is abnormal in AUTO
mode, choose another colour system manually.
• When in the TV mode (PR 1 to PR 99), you cannot
choose AUTO, NTSC 3.58 or NTSC 4.43.
• When in the TV mode (PR 0), you cannot choose
NTSC 3.58 or NTSC 4.43.
1
/
OK
PAL
TV OK
COLOUR SYSTEM
2
/
3
OK
eng_AVTX29_P12-17.fm Page 16 Friday, August 20, 1999 1:48 PM