Filter
Top Products
4
Preparation
When the ACI menu is displayed:
If your Cable TV station supports ACI (Automatic Channel Installation),
the ACI menu is displayed. Please operate it according to the “ACI Op-
eration” procedures at the bottom of this page. The channel is set quickly
to the PR channel according to the order decided for all the channels.
Press to exit the Edit menu.
The T-V LINK menu is displayed.
EDIT
CH/CC
PR ID
AV
01
02
03
04
05
06
07
08
09
CH 21
CH 23
BBC1
CH 22
CH 26
CH 25
CH 24
CC 01
CC 02
CC 03
TV OK
ID
INSERT
DELETE
MANUAL
MOVE
CH 10
AUTO PROGRAM
TV OK
20%
7
OK
OK
MENU
T-V LINK
DOWNLOAD TV VCR
EXIT
TV OK
■ When a T-V LINK compatible VCR is
connected
Turn the VCR on.
Press .
■ When a T-V LINK compatible VCR is
not connected
Press .
The menu disappears.
This completes the Initial Settings
procedure.
8
9
OK
OK
MENU
TRANSFER.....
8
TV
TV
The transmission of PR channel data from the TV to the VCR begins. The display disappears once the data trans-
mission ends.
This completes the Initial Setting procedure.
Press to choose your area.
Press .
“ACI” is displayed in the AUTO PROGRAM menu and the ACI starts.
The EDIT menu is displayed after the channels have been set.
If “ACI ERROR” is displayed, press to re-start the ACI.
• If “ACI ERROR” is displayed anyway, press
and cancel ACI, then start the
ordinary Auto Programming.
Notes:
• For details about T-V LINK, refer to page 5.
• Depending on the type of VCR, the display may change once data transmission ends. In this case, refer to the VCR’s In-
struction manual.
ACI Operation
1
/
2
OK
OK
Note:
• If a station you want to view is
not set to a PR channel, manual-
ly set it using the Edit menu.
(See page 22.)
Note:
• The ACI may not work correctly
if you don’t have good reception.
eng_AVTX29_P1-11.fm Page 4 Friday, August 20, 1999 1:47 PM