Filter
Top Products
ENGLISH
27
Connecting an Audio System
You can use your audio system as front speakers instead of
the front speakers on the TV.
(Terminals on rear)
Connect your stereo amplifier
1
to the AUDIO
OUT terminals.
Turn the TV on and set the volume to the low-
est setting.
Press .
The MENU appears.
Press to choose SOUND SETTING. Then
press .
The Sound Setting menu appears.
Press to choose SPEAKER and press
to choose OFF. Then press .
To output sound from the TV speakers:
Set SPEAKER to ON.
Press .
This completes the settings.
Turn the stereo amplifier on and re-adjust the
volume setting, then press to adjust the
volume.
Caution:
Do the following before connecting,
• Turn the power of all the equipment off.
• Set the amplifier volume to low.
• Read the manuals provided with the amplifiers and
speakers.
Notes:
• Use the AUDIO OUT terminals for connecting an audio
system.
The volume output is controlled via the TV and The AU-
DIO OUT terminal output is not interrupted by head-
phone connection.
• Use magnetic-shielded speakers for front speakers
2
to prevent interference by the TV.
AUDIO OUT
L
R
2
1
1: Stereo amplifier
2: Front speakers (Magnetic-shielded Type, L, R)
1
2
3
OK
4
/
OK
MENU
STEREO/I•II
BASS
TREBLE
BALANCE
HYPER SOUND
SPEAKER
SOUND SETTING
TV OK
0
OFF ON
OFF ON
Note:
• Setting the volume of the stereo amplifier too high
may damage the speakers.
5
/
/
OK
6
OK
7
/
eng_AVTX29_P18-32.fm Page 27 Friday, August 20, 1999 1:50 PM