Filter
Top Products
ENGLISH
7
Basic Operation
Watch images from external devices.
Choosing an EXT terminal or PR 0 (AV) channel.
• The EXT terminals are registered after the PR 99 channel.
• Pressing button changes the choice as follows:
● To return to a TV channel:
● When the TV and VCR are connected only by the RF cable, the VCR
RF channel* must be preset to the PR 0 (AV) channel to view VCR
video. Choosing the PR 0 (AV) channel allows you to view images
from VCR video.
Pressing button changes the choice as follows:
Turn the TV on from standby mode.
Choose a channel or an EXT terminal.
Adjust the volume.
Press .
The volume level indicator appears.
Press –/+ while the volume level indicator is displayed.
Indicator is displayed.
Operating with the Buttons on the TV
PR LIST
PR ID
97
98
99
E1
E2
E3
E4
AV
01
02
TV OK
+10-10
BBC1
oror
0
AV
P
P
0
AV
E2
or
S2
E3
or
S3E4
or
S4
E1
TV mode EXT modes
PR channel
number
EXT-1
EXT-4
EXT-2
EXT-3
TV
P
P
1 2 3
4 5 6
7 8 9
0
AV
PR LIST
PR ID
97
98
99
E1
E2
E3
E4
AV
01
02
TV OK
+10-10
BBC1
oror or
0
AV
E2
or
S2
AV
E3
or
S3E4
or
S4
E1
TV mode
EXT modes
PR channel
number
EXT-1
EXT-4
EXT-2
EXT-3
PR 0 channel
P
P
(Behind the front cover)
1
2
3
1
2
Notes:
• To use S-Video mode to view in-
put from an S-VHS VCR, see
“To choose S-VIDEO input” on
page 18. When choosing EXT-
2, EXT-3 or EXT-4 input termi-
nals as S-VIDEO input, E2, E3
or E4 changes to S2, S3 or S4 in
the display.
• If you don’t have a clear picture
or no colour appears, change
the colour system manually.
(See “Colour System” on page
16.)
• When choosing an EXT terminal
with no input signal, the EXT
number and ID become fixed on
screen.
Note:
• The VCR RF channel is the
channel that is sent as the RF
signal from the VCR. To set the
VCR RF channel to the PR 0
(AV) channel, refer to “Edit/Man-
ual” on page 22. Also refer to the
manual provided with the VCR.
eng_AVTX29_P1-11.fm Page 7 Friday, August 20, 1999 1:47 PM