Filter
Top Products
10 EN
Before you start
Functional overview (cont’d)
Using a remote control
Keep in mind the following when using the remote
control:
•
Make sure that there is no obstacle between the
remote control and the remote sensor of the unit.
• Remote operation may become unreliable if
strong sunlight or fluorescent light is on the
remote sensor of the unit.
• Remote control for different devices can inter-
fere with each other. Avoid using remote control
for other equipment located close to the unit.
•Replace the batteries when you notice a fall-off
of the operating range of the remote control.
• The maximum operable ranges from the unit are
as follows.
-
Beeline: approx. 23 feet (7m)
- Either side of the center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
Installing batteries in the remote control
Install two “AA” size batteries (supplied), matching
their polarity to those indicated inside battery com-
partment of the remote control.
21
3
Note:
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please follow the instruction
below:
• Do not mix new and old batteries together.
•Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
•Make sure that the plus and minus ends of each
battery match the indications in the battery com-
partment.
• Remove batteries from equipment that is not going
to be used for a month or more.
•When disposing used batteries, please comply with
governmental regulations or public rules for envi-
ronmental protection that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or disas-
semble batteries.
C
H
Remote
control
Within about
23feet (7m)
30˚
30˚
M
E
N
U
/
L
I
S
T
N
U
P
R
O
G
C
L
EA
R
A
U
DIO
R
E
PE
A
T
O
N
S
C
R
E
EN
O
P
E
N
/
C
L
O
S
E
S
E
T
U
P
Z
O
O
M
P
R
N
T
E
R
S
H
O
W
V
I
E
W
/
V
I
D
E
O
P
l
us
+
DISPLAY menu
Press [ON SCREEN] to call up
the display menu.This menu will
give you the information on the
disc. Some operations are avail-
able while disc is played back.
1. Indicates a disc type and a
format mode.
Note:
In some descriptions on
this manual, only one disc type
is indicated as an example.
2. Indicates a current channel
number and an audio status of
the program.
3. Indicates a recording mode
and possible recording time
left.
4. Indicates a title number, chap-
ter number and the time
elapsed of disc play.
5. Each icon means:
6. Indicates current disc status.
: Search
: Audio
: Subtitle
: Angle (except VR mode)
: Repeat
: Marker
: Noise Reduction
: Zoom
DVD-RW11 0:00:00
XP 1:01
CH 8
Stereo
Video mode
14
5 252
3
6
3
Note:
• This is an example screen only for explanation. Displayed items will change depending on the actual mode.
• DISPLAY function is not available when no disc is inserted.
Code: JVC C
E6751CD_EN1.qxd 05.7.19 5:27 PM Page 10