Filter
Top Products
80 EN
Symptom Remedy
Recording/Timer Recording/Editing
The channel cannot be changed from the
channel you are recording.
• Set the TV’s input to “TV.”
The unit starts playing back the disc
automatically.
• The DVD-Video provides an auto playback function.
Recording does not start immediately
after you press [REC I].
• An unused DVD-R or DVD-RW was inserted. It takes a while
for the unit to automatically format a DVD-RW.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
•
Depending on the disc, you may not be able to do some of these
operations. See the instruction manual supplied with the disc.
The language for the sound track cannot
be changed.
• Multilingual tracks are not recorded on the DVD-Video,
DVD-R or DVD-RW being played back.
• The DVD-Video prohibits the changing of the language for the
sound track.
•Try changing the language using the DVD-Video’s menu.
The angles cannot be changed. •
Multi-angles are not recorded on the DVD-Video being played back
.
• The angle-change operation is possible as long as the disc
contains a multi-angle portion. Actual change can be performed
when the portion has come up.
• The DVD-Video prohibits changing angles.
•Try changing the angles using the DVD-Video's menu.
Nothing was recorded even though you
set the timer setting correctly.
• There was a power failure during recording.
• The unit's internal clock stopped due to a power failure that
lasted for more than 30 seconds.
• Reset the clock (pages 2
3
, 24).
• Disconnect the AC power cord from the AC outlet, and
connect it again.
• The program contains copy protection signals that restricts
copying.
• The timer setting overlapped with another setting that was set
later or has priority.
The subtitle language cannot be changed
or turned off.
• Multilingual subtitle are not recorded on the DVD-Video.
• The DVD-Video prohibits changing of the subtitles.
•Try changing the subtitles using the DVD-Video’s menu.
The disc does not start playback from the
beginning.
•
Resume playback was activated (page 46). Press [STOP
C
] twice.
•
You have inserted a disc whose Title menu or DVD menu automatically
appears on the TV screen when it is inserted for the first time.
Playback
The unit does not play back the disc.
• No disc is inserted.
•A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side
facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM)
(page 42).
• The region code on the DVD-Video does not match the ones
on the unit (page 42).
• Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on for about two hours until the moisture
evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot
play back the disc unless it is finalized (page 40).
Playback image freezes for a second. • During the playback of two layered disc, picture may freeze for
a moment when the 1st layer switches to the 2nd layer. This is
not a malfunction.
Recording does not stop immediately
after you press [STOP C].
• It will take a few seconds for the unit to input disc data before
recording can stop.
Timer Recording is not completed or did
not start from the beginning.
• The timer setting overlapped with another setting that was set
later or has priority (page 36).
• Disc space was not enough.
Others
Troubleshooting (cont’d)
E6751CD_EN1.qxd 05.7.19 5:28 PM Page 80