Filter
Top Products
76 EN
Changing the Setting menu
Playback
Parental Lock All
TV Aspect 4:3 Letter Box
Subtitle Language OFF
Fast Forward with Audio ON
Dynamic Range Control ON
Disc Menu Language English
Audio Language Original
Digital Out
Progressive OFF
Digital Out
Dolby Digital Stream
PCM 48kHz
DTS ON
Digital Out
Set the digital audio output.
• Using [K / L], select a set-
ting. Press [ENTER].
Option window will appear.
Proceed to steps A, B or C.
Settings for Dolby Digital (Default : Stream)
Digital Out - Dolby Digital
Stream
PCM
Settings for PCM (Default : 48kHz)
• Using [K / L], select a setting. Press
[ENTER].
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT com-
patible with 96kHz PCM, select “48kHz”.
96kHz sound will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible
with 96kHz PCM, select “96kHz”. 96kHz
sound will be output.
Note
When playing back disc
with copyright protection
•Even if you select “96kHz”,
the sound will be down
sampled at 48kHz.
• Using [K / L], select a setting. Press
[ENTER].
Your setting will be activated.
PCM :Convert the Dolby Digital into PCM
(2 channel).
When your amplifier/decoder is NOT com-
patible with Dolby Digital, set to “PCM”.
Stream : Outputs Dolby Digital signals.
When your amplifier/decoder is compati-
ble with Dolby Digital, set to “Stream”.
B
A
Audio setting (cont’d)
Note
When playing back a
DVD-RW disc recorded
in VR mode
•
If the audio on a disc is
recorded in Dolby Digital
format, set “Dolby
Digital” to “PCM” so that
you can switch to main
(L), sub audio (R), or a
mix of both (L/R) with
your amplifier/decoder.
Digital Out - PCM
96kHz
48kHz
2
Using [K / L], select “Advanced Setting Menu”. Press
[ENTER].
Advanced Setting Menu will appear.
3
Using [K / L], select “Playback”. Press [ENTER].
Option window will appear.
4
Using [K / L], select a desired item. Press [ENTER].
Note
• Dynamic Range Control
is available only on the
discs which are recorded
in Dolby Digital format.
RETURN
MENU/LISTTOP MENU
VCR Plus+
PROG
ENTER
2
3
4
Settings for DTS (Default : ON)
Digital Out - DTS
OFF
ON
•
Select a setting using [K / L], then press [ENTER].
Your setting will be activated.
ON : Outputs DTS signals.
When your amplifier/decoder is compatible with DTS, set to “ON”.
OFF : No DTS signal is output.
When your amplifier/decoder is NOT compatible with DTS, set to
“OFF”.
C
E6751CD_EN1.qxd 05.7.19 5:28 PM Page 76