JVC DR-M70SU DVD Recorder User Manual


 
72 EN
Changing the Setting menu
Tour of the Setting menu
Note
•If you change the settings in the
Setting menu, the information of
contents stays on even after the
power is switched off or the disc
tray is opened or closed.
An item which is not currently avail-
able is grayed out in Setting menus.
1.Language setting
Pages 73-74
Pages 74-75
Pages 75-77
Pages 77-78
2.Display setting
3.Audio setting
4.Parental setting
Setting menu ContentsItems (highlight is the default)
Disc Menu Language Set the language for disc menu.
Set the language for audio.
Set the language for subtitles.
Set the language for OSD
(On-Screen Display).
Set the idling time before the screen saver
starts.
Compressing the range of sound volume.
Set whether or not to output sound during
fast forward playback.
Set the parental level for DVD disc playback.
Set and change the password.
Audio Language
Subtitle Language
OSD Language
Screen Saver
Digital Out
Dynamic Range
Control
Fast Forward with
Audio
Parental Lock
(Change password)
English
French
Spanish
Original
English
French
OFF
English
French
OFF
5 minutes
10 minutes
Set the brightness of front display.
FL Dimmer
Auto
Bright
Dark
English
Français
Español
ON
OFF
ON
OFF
All
level 8 to 1
Enter the current
four-digit password.
Set whether the sound recorded in 96kHz
will be down sampled in 48kHz.
PCM
48kHz
96kHz
Set the type of sound signal output
from the digital audio output jack.
Dolby Digital
PCM
Stream
Set whether or not DTS signal will be
output.
DTS
ON
OFF
The following table shows the items which you can change the setting and their default settings.
Refer to the following table for your convenience.
E6751CD_EN1.qxd 05.7.19 5:28 PM Page 72