JVC DR-M70SU DVD Recorder User Manual


 
Recording
Disc Playback
EditingBefore you start
Connections
Getting started
Changing the Setting menu
Others
EN 3
Before you start
Precautions (cont’d)
IMPORTANT SAFEGUARDS
1.Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2.Retain Instructions- The safety and operating instructions
should be retained for future reference.
3.Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4.Follow Instructions - All operating and use instructions should
be followed.
5.Cleaning - Unplug this product from the wall outlet before
cleaning.Do not use liquid cleaners or aerosol cleaners.Use
a damp cloth for cleaning.
EXCEPTION:A product that is meant for uninterrupted ser-
vice and,that for some specific reason,such as the possibility
of the loss of an authorization code for a CATV converter,is
not intended to be unplugged by the user for cleaning or any
other purpose,may exclude the reference to unplugging the
appliance in the cleaning description otherwise required in
item
5.
6.Attachments - Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
7.Water and Moisture- Do not use this product near water,for
example, near a bath tub,wash bowl, kitchen sink,or laundry
tub,in a wet basement,or near a swimming pool,and the like.
8.Accessories - Do not place this product on an unstable cart,
stand, tripod, bracket, or table.The product may fall, causing
serious injury to a child or adult, and serious damage to the
appliance.Use only with a cart,stand, tripod,bracket, or table
recommended by the manufacturer,or sold
with the product. Any mounting of the
appliance should follow the manufacturer's
instructions and should use a mounting
accessory recommended by the manufac-
turer. An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
9.Ventilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and
to protect it from overheating,and these openings must not
be blocked or covered.The openings should never be blocked
by placing the product on a bed,sofa,rug,or other similar sur-
face.This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is pro-
vided or the manufacturer's instructions have been adhered to.
10.Power Sources - This product should be operated only from
the type of power source indicated on the marking label.If you
are not sure of the type of power supply to your home, con-
sult your appliance dealer or local power company. For prod-
ucts intended to operate from battery power, or other
sources,refer to the operating instructions.
11.Grounding or Polarization - This product is equipped with a
polarized alternating-current line plug (a plug having one blade
wider than the other).This plug will fit into the power outlet
only one way.This is a safety feature.If you are unable to insert
the plug fully into the outlet,try reversing the plug.If the plug
should still fail to fit, contact your electrician to replace your
obsolete outlet.Do not defeat the safety purpose of the polar-
ized plug.
12.Power Cord Protection - Power supply cords should be rout-
ed so that they are not likely to be walked on or pinched by
items placed upon or against them,paying particular attention
to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
13.Outdoor Antenna Grounding - If an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges.Article
810 of
the National Electrical Code, ANSI/NFPA No.
70,provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an
antenna discharge unit,size of grounding conductors,location
of antenna-discharge unit,connection to grounding electrodes,
and requirements for the grounding electrode.(Fig.A)
14.Lightning - For added protection for this product during a light-
ning storm,or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system.This will prevent damage to the
product due to lightning and power-line surges.
15.Power Lines - An outside antenna system should not be locat-
ed in the vicinity of overhead power lines or other electric light
or power circuits,or where it can fall into such power lines or
circuits.When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
16.Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry - Never push objects of any kind into
this product through any openings as they may touch danger-
ous voltage points or short-out parts that could result in a fire
or electric shock.Never spill liquid of any kind on the product.
18.Servicing - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards.Refer all servicing to qualified service
personnel.
19.Damage Requiring Service - Unplug this product from the wall
outlet and refer servicing to qualified service personnel under
the following conditions:
a.When the power-supply cord or plug is damaged.
b.If liquid has been spilled, or objects have fallen into the prod-
uct.
c.If the product has been exposed to rain or water.
d.If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjust-
ment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the
product to its normal operation.
e.If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance
this indicates a need for service.
20.Replacement Parts - When replacement parts are required,be
sure the service technician has used replacement parts speci-
fied by the manufacturer or have the same characteristics as
the original part.Unauthorized substitutions may result in fire,
electric shock or other hazards.
21.Safety Check - Upon completion of any service or repairs to
this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
22.Heat - This product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND
CLAMP
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC – NATIONAL ELECTRICAL CODE
S2898A
E6751CD_EN1.qxd 05.7.19 5:27 PM Page 3