Filter
Top Products
EN 35
Recording
Disc Playback
EditingBefore you start
Connections
Getting started
Changing the Setting menu
Others
Recording
Timer Recording (cont’d)
Each error number means:
If the timer program did not complete correctly, the error number appears on the timer pro-
gramming list.
Timer Programming
2. ---
3. ---
*
JAN/01 12:57AM 1:57AM CH8 E22
Date Start End CH Speed
E1-22 Recording error other than
E37-39 below
E23-24 Unrecordable disc
E25-28 Copy prohibited program
E29 Disc protected
E30 Disc full
E3
1-32 Already 99 titles recorded
E33 Already 999 chapters recorded
E34 No space for Control information
E35 PCA full
E36 Already finalized Video format
disc
E40 Some portion has not been
recorded because of program
overlapping.Recording did not
start at the start time.
E4
1 Power failed
E42 No disc when recording
Note
•A program with the error
number is highlighted in gray
of the asterisked line in the
timer programming list.
• Once the timer programming
list with error indication is dis-
played, the program line(s)
with error will be cleared only
after the programs are can-
celed and reset to the timer
standby mode.
• The current recording pro-
gram will be highlighted in red.
Error number will appear
-An OTR is completed, and
there is no other timer
recordings in standby.
- The timer standby mode is
cancelled by pressing
[STANDBY/ON
yy
/I]
.
-
[STANDBY/ON
yy
/I] is
pressed during timer stand-
by,and the component that
is not in timer standby
mode is turned on.
- The unit entered into the
timer standby mode.
-A Timer Recording or an
OTR has started.
-
When this indicator is on,
you cannot use
[SET UP].
- All timer recordings are
completed.
- The DVD entered into the
timer standby mode when
no disc or an unrecordable
disc is in the unit.
- The disc runs out of the
space during Timer
Recording.
(CLOCK) mark
Lights off Lights on Flashing
Explanation on the front panel indicator during Timer Recording
E6751CD_EN1.qxd 05.7.19 5:27 PM Page 35