Filter
Top Products
12
Using Basic Playback Controls
Rewinding a tape
While the tape is stopped, press REW on the remote control or on the front
panel.
Fast forwarding a tape
While the tape is stopped, press FF on the remote control or on the front
panel.
Speed Search with picture
While the tape is playing, press FF for forward speed search with picture or
press REW for reverse speed search. See page 40 for additional information on
searching techniques.
Pausing a tape
While the tape is playing, press PAUSE on the remote control or on the front
panel to freeze the picture on the screen.
Press PAUSE a second time to return to normal play.
If you leave the VCR in pause for more than 5 minutes, the VCR will
automatically stop to prevent damage to the tape.
Controlling Vibration During Still Frame
If the picture vibrates during still frame, press the CHANNEL ª or º on the
front panel until the picture is steady.
Unloading a Tape
1 Press EJECT on the front panel or on the remote control. If the VCR
POWER is off, the VCR will turn on, eject the tape, then turn off.
2 Remove the tape.
Using repaired tapes
We recommend that you take any broken or torn tapes to a professional for repair. If
you repair a torn tape with improper materials, you could damage your VCR when you
play the tape.
Head cleaning
Your VCR automatically cleans the head and the drum of the VCR whenever
you load a tape. If you see “noise” or snow when playing a tape, eject the tape,
re-load the tape, then wait 3 or 4 seconds. Repeat this process several times to
improve the picture.
213
546
879
0
X
2
REW
REW
213
546
879
0
X
2
FF
FF
213
546
879
0
X
2
PAUSE
PAUSE
CHANNEL
213
546
879
0
X
2
EJECT
EJECT
Playback