Filter
Top Products
13
Your VCR comes with Mitsubishi’s exclusive on-screen operating
system. This system has been developed to simplify the operation of your VCR
with clear, understandable language and design.
Before your VCR can receive television channels or you can program your VCR to
record, you need to memorize all of the channels you can receive into your VCR
and set the clock. Additionally, if you are using a satellite receiver, you need to do
a first time setup to memorizing satellite brand code. Fortunately, your VCR
makes this an easy process with our menu system.
When using the on-screen menus, use the ADJUST buttons to move the highlight
bar up or down and to change the setting of selected features. Press the ENTER
button to enter a selection or adjustment. Press the CANCEL button to cancel
or clear a setting.
Memorizing Channels Automatically
Using this process, your VCR will automatically memorize all of the television
stations available to you. You can later get rid of unwanted or unused stations.
You need to manually set the brand code for the a satellite receiver.
If your local cable company scrambles some or all stations, and/or requires you
to use a cable box, then your ability to memorize channels would normally be
limited. The cable box receives all of your channels, then sends only one to your
TV and your VCR, usually on channel 3 or 4.
If you are required to use a cable box, you should choose Cable box only or
Digital Cable box only option in step 4 on the next page and turn the cable box
on. Your HS-U778 will use its Converter Box Control technology to change the
channels on the cable box. Make sure you have properly placed the IR Emitter
(see page 9).
If your cable box or cable system seems incompatible with your new VCR, call
your cable company. They may be able to provide solutions to your problems.
1 Set the VCR’s input to Tuner. To do this, press INPUT on the remote control
until a channel number appears on the screen or on the front panel display.
2 Press MENU on the remote control. VCR Main Menu comes up. If First
Time Set-Up is not highlighted, use the ADJUST buttons on the remote to
highlight it.
3 Press ENTER. First Time Set-Up menu will appear. Press the ADJUST
buttons to select Memorize channels. Press ENTER.
IMPORTANT
IMPORTANT
If you are recording, playing back a tape, or receiving a video signal from
an external input, Not available will flash and an error message will
appear. To correct this, stop the tape or turn off the menus and switch
the VCR’s input to tuner.
Setting Up Your VCR
213
546
879
0
X
2
ADJUST
ADJUST
ENTER
CANCEL
Press to
Enter
Press to
Cancel
Press to
Select
ƒFirst Time Set-Up
≈Set the clock
∆Memorize channels
«Add/delete channels
±Sat.receiver (OFF)
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
ªVCR Main Menu
¬Program to record
PrograManager
√Customize choices
»S-VHS Set-Up
ƒFirst Time Set-Up
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
A special note to cable
box subscribers