Mitsubishi Electronics HS-U778 VCR User Manual


 
42
repeat playback
You can playback a section of tape over and over using repeat playback. The tape
will play until the next index mark, rewind to the previous index mark, and
resume playing. If there is only one index mark on the tape, then the VCR will
play or rewind to that mark and resume playback. If there is no index mark, the
entire cassette will repeat.
1 Press AUDIO/VIDEO on the remote control to display the function menu.
Press AUDIO/VIDEO until the Repeat play function appears.
2 To start the playback, press ENTER.
When the VCR encounters the next mark or the end of the tape, it will
automatically rewind to the previous mark and begin playback again.
The VCR will also search for a blank section of tape. If the VCR encounters any
blank sections longer than 4 seconds in length, the repeat playback will begin.
3 Press STOP to cancel the repeat.
Search to blank
This feature allows you to find the end point of the recorded part of the tape.
The VCR will stop automatically at the beginning of the blank section of a tape.
1 Press AUDIO/VIDEO on the remote control to display the function menu.
Press AUDIO/VIDEO until the Search to blank function appears.
2 To start the search, press ENTER. When the VCR encounters the blank
section of a tape, it will automatically stop.
IMPORTANT
IMPORTANT
This feature may not work correctly when the end point of the recorded
part is within 5 minutes in SP mode (15 minutes in EP mode) from the
current position.
Using PrograManager
PrograManager feature allows you to memorize the channel, month, date, hour
and minutes of the programs you have recorded, and displays the list to confirm
the contents of the tapes or to search the program which you want to playback.
To use PrograManager, you have to assign a number for each tape that you want to
use this feature with and also specify the tape length (for example, T-120,T-160,
etc.) before the recording can start. Also, the clock must be set correctly. When
it has been set and program is recorded for more than 5 minutes in SP mode and/
or 15 minutes in EP mode, the recorded contents will be memorized in the VCR.
This memorized data will be displayed and be used repeatedly when this tape is
loaded again and its assigned tape number is entered.
The VCR can memorize the contents of up to 10 tapes (12 programs per tape at
the maximum). If you record more than 13 programs for one tape, the
memorized data will be erased from the first recorded program. You can erase
the data of each tape.
If you set the Auto PrograManager in the Customize Choices menu to ON, the
screen to decide whether you set the tape number will appear when the tape is
loaded. See page 51 for more information on the Auto PrograManager.
Memorizing the contents of the tape
To memorize the contents of the tape, you have to assign a tape number and
specify the length of the tape before the recording can start.
Advanced Features
VCR
Repeat play
Use ENTER to start
VCR
Search to blank
Use ENTER to start