Filter
Top Products
48
RF converter
If your TV has audio and video inputs, turn the RF converter OFF. If your TV does
not have audio and video inputs, keep the RF converter set to ON. It is preset by
the factory to ON.
3 Complete steps 1 and 2 on the previous page. Customize choices menu
appears. Use the ADJUST buttons to select RF converter. Press ENTER to
select ON or OFF.
4 Press MENU twice to turn off the menus.
IMPORTANT
IMPORTANT
If the RF converter is set to ON, you aren’t required to press VCR/TV to
play a tape or to use VCR menus. The VCR light will automatically light up
when you press PLAY or MENU. Be sure to set the TV to the video channel
(See page 10).
PerfecTape
®
PerfecTape
®
is an exclusive Mitsubishi feature that tests the quality of video tapes
you will record on. After each test, the VCR will adjust its internal circuitry in
order to make the best possible recording on your tape.
setting up PerfecTape
®
You can set up PerfecTape
®
to function two ways.
If you want the VCR to automatically test any non-recorded tapes when the tape
is loaded, select AUTO.
If you do not want the VCR to automatically test tapes, select MANUAL.
PerfecTape
®
will now function only when you start a test. Any tape with the
erasure prevention tab intact can be manually tested.
It will not automatically test recorded tapes – you must choose to test those
yourself.
3 Complete steps 1 and 2 on the previous page. Customize choices menu
appears. Use the ADJUST buttons to select PerfecTape.
4 Press ENTER to set PerfecTape to AUTO or MANUAL.
5 Press MENU twice to turn off the menus.
using PerfecTape
®
automatically
1 Load a tape that has not been recorded into the VCR.
The VCR will display the testing status screen. When testing, the VCR records for
one second, then evaluates the recording it made. The entire test takes about 8
seconds. During this time, the PT light on the front panel will flash. If you wish
to cancel the test, press STOP on the remote while the PT light is still flashing.
When the test is done, the VCR will display the rating of your tape for 8 seconds.
On the front panel, the PT light will shine steadily, indicating that the VCR has set
its internal circuitry to make the best possible recording on this tape.
Advanced Features
√Customize choices
ƒVideo mute (ON )
ƒAuto power save (OFF)
ƒRF converter (ON )
ƒPerfecTape (AUTO)
Go to next page §
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to change
∑ ππADJUST to select
PerfecTape:SP
Band S-ET record: ON
High ¤°°°°°°°°°‡‡‡‡‡‡‡›
Mid ¤°°°°°°°°°°°‡‡‡‡‡›
Low ¤°°°°°°°°°°°‡‡‡‡‡›
Test is completed
√Customize choices
ƒVideo mute (ON )
ƒAuto power save (OFF)
ƒRF converter (ON )
ƒPerfecTape (AUTO)
Go to next page §
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to change
∑ ππADJUST to select