Filter
Top Products
43
IMPORTANT
IMPORTANT
Make sure that the clock has been set correctly before memorizing the
contents of the tape.
1 Load the tape. Press MENU on the remote control. VCR Main Menu
appears. Press the ADJUST buttons to select PrograManager. Press ENTER.
2 The PrograManager menu will appear. Press the ADJUST buttons to select
Assign/Enter Tape No. and press ENTER.
3 The screen for selecting the tape number appears. Press the number button
that corresponds to the desired tape number (for example, no.0). Press
ENTER.
4 The screen for setting the tape length appears. The tape length that you have
set in the audio and video function menu will be highlighted. If the
highlighted setting is not match the length of the tape to be recorded, press
the ADJUST buttons to highlight the correct setting. Press ENTER.
5 The message to confirm the selected tape number and tape length will
appear. Press ENTER to enter the displayed tape number and length.
If the displayed number or length is not correct, press MENU. The
PrograManager menu will reappear. Set the tape number and length again by
following the directions from step 2.
6 The contents of the tape of the selected tape number will be displayed. Press
MENU three times to turn the menu off. If you want to search the listed
program, follow the procedure from step 4 on the next page.
7 Record the program. The contents of that tape will be memorized
automatically when you eject the tape.
After the recording is finished, write the tape number on its label to avoid
assigning the wrong tape number when you memorize the contents for that
tape again.
When you want to memorize the data in addition to previously memorized
programs, follow the procedure from step 1 on the previous page.
Advanced Features
ªVCR Main Menu
¬Program to record
PrograManager
√Customize choices
»S-VHS Set-Up
ƒFirst Time Set-Up
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
PrograManager
Your choices are:
ƒAssign/Enter Tape No.
ƒDisplay memorized data
Use ADJUST to select,
and ENTER.
Press MENU to go back.
PrograManager
Tape No.0 Page 1/1
No data
ππππππππππππππππππππππππ
Use 0-9 to select number
and ENTER.
Press MENU to go back.
PrograManager
Tape No.0
Tape length: T-120
PrograManager will not
work correctly if
Tape No. and Tape length
setting is wrong.
Press ENTER to confirm.
Press MENU to go back.
PrograManager
Tape No.0
Tape length: T-120
T-160
T-180
T-210
Use ADJUST to select,
and ENTER.
Press MENU to go back.
PrograManager
Tape No.0 Page 1/1
No data
ππππππππππππππππππππππππ
Press MENU to go back.