28
Mitsubishi offers 3 ways to set your VCR to record upcoming broadcasts. Choose
from:
Conventional VCR timer recording
Quick Program (easy) -- VCR does not need to be on to begin programming
VCR Plus+
®
system programming (easy)
You can schedule up to 8 recording events within a one month period.
Clock must be set before any timer recordings can be performed.
Conventional VCR Timer Recording
1 Load a tape with its erasure prevention tab intact into the VCR.
2 Press MENU. VCR Main Menu appears on your screen. Use the ADJUST
buttons to select Program to record. Press ENTER.
If there is at least one programmed recording already entered, you will see
the Recap screen. Wait 4 seconds, and the VCR Plus+ system menu will
appear.
IMPORTANT
IMPORTANT
If you have already programmed 8 recording events, Program memory is
full will appear on your screen for 3 seconds, and then the Recap screen
will appear. Use CANCEL to erase an entry before you can add another
one.
3 VCR Plus+ system menu appears. See page 31 to learn how to program with
VCR Plus+
®
system. To pass this screen, press ENTER.
4 Program to record menu appears. Press the ADJUST buttons to choose the
channel you would like to record; for example, channel 2. Press ENTER.
• If you are using a cable box that the VCR cannot control, enter the
channel number on which the cable box sends a signal to your VCR
(usually channel 3 or 4).
• If you are recording from a DSS
®
, PRIMESTAR
®
or DISH Network
™
satellite receiver, simply choose the channel you would like to record;
for example, channel 245. SAT will display next to the channel number.
• To record from an external source, press INPUT or press the ADJUST
buttons to:
Select External L1 for a source connected to the rear panel.
Select External L2 for a source connected to the front panel.
ªVCR Main Menu
¬Program to record
PrograManager
√Customize choices
»S-VHS Set-Up
ƒFirst Time Set-Up
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬VCR Plus+ system
Use number keys to enter
the PlusCode number
--------
or press ENTER to
program.
Press MENU to go back.
¬Program to record
ƒChannel 2
ƒDay --
ƒStart time --:--
ƒStop time --:--
ƒRecord speed AUTO
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬Program to record
CH DAY ON OFF
10 TH14 9:00p10:00pSP
§--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
Recap screen
Timer Recording