Filter
Top Products
37
Editing Features
R
VIDEO S-VIDEO
OUT
AUDIORL
L
R
L
RECORDING
PLAYBACK
AUDIO OUT L
AUDIO OUT R
AUDIO IN R
AUDIO IN L
VIDEO IN
S-VIDEO IN
VIDEO OUT
S-VIDEO OUT
HS-U778
Using the HS-U778 to playback to another VCR
1 Connect one stereo audio cable to AUDIO IN L
and R on the recording VCR, and to AUDIO OUT
L and R on the HS-U778. If the other VCR is
mono, you need a Y-adapter to record both audio
channels.
2 If the recording VCR is standard VHS, connect a
yellow video cable to VIDEO IN on the recording
VCR and to VIDEO OUT on the HS-U778.
If the recording VCR is S-VHS, connect an S-video
cable to S-VIDEO IN on the recording VCR and to
S-VIDEO OUT on the HS-U778.
3 Set the audio monitor on the HS-U778 to Stereo.
You should set the PerfecTape Select in the audio
and video function to Normal to improve the
quality of your copy. See Selecting and
adjusting the audio and video functions on
page 27.
4 Set the input of the recording VCR to External.
5 Put a blank tape into the recording VCR. If the
recording VCR is an S-VHS VCR, be sure to use an
S-VHS tape.
6 Put the tape you want to copy into the HS-U778
and find the cue point.
7 On the recording VCR, press REC, then PAUSE.
8 On the HS-U778, press PLAY, then PAUSE.
9 Press the PAUSE buttons on both VCRs at the
same time to begin copying the tape.
10 Press STOP on both VCRs when you are finished.