Filter
Top Products
51
Auto PrograManager
Auto PrograManager is a reminder screen to prompt you to select a tape number
when you load a tape. If you wish to be reminded, set the Auto PrograManager in
the Customize Choices menu to ON. If you do not wish to be reminded, set it to
OFF.
3 Complete steps 1 and 2 on page 47. Customize choices menu appears. Use
the ADJUST buttons to select Go to next page. Press ENTER.
4 Press the ADJUST buttons to select Auto PrograManager. Press ENTER to
select ON or OFF.
5 Press MENU twice to turn off the menus.
loading a tape when the Auto PrograManager in the Customize
Choices menu is set to AUTO
1 Load the tape. The screen to decide whether you set the tape number will
appear. Select Yes when you want to set the tape number. Press ENTER.
When you do not want to set the tape number, select No and press ENTER.
The menu will be turned off. The menu will also be turned off when you
press MENU.
2 The screen for selecting the tape number will appear. Follow the step 3 to 7
on page 43 to use PrograManager feature.
When you memorize the contents of the tape with the Auto PrograManager
is set to AUTO, pressing MENU while the PrograManager screen is displayed
turns the menu off.
Advanced Features
√Customize choices
ƒRental Xpress (OFF)
ƒA/V Network (ACTIVE)
ƒAuto PrograManager
(ON )
Back to previous page §
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to change
∑ ππADJUST to select
√Customize choices
ƒVideo mute (ON )
ƒAuto power save (OFF)
ƒRF converter (ON )
ƒPerfecTape (AUTO)
Go to next page §
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
PrograManager
Did you assign a number
to this tape?
ƒYes
ƒNo
Use ADJUST to select,
and ENTER.
Press MENU to exit.