Filter
Top Products
30
Canceling a recording in progress
There are two ways to cancel a recording in progress:
Press STOP. The recording stops, but the program is not cancelled.
Therefore, if you press REC, the recording will start again.
Press POWER on the front panel. The recording stops and the program is
cancelled.
Changing while programming
To change one of your settings (such as start time) while you are programming:
Press ENTER to move forward through the program list.
Press CANCEL to move backward.
Then use the ADJUST buttons to change the setting.
You will cancel the entire program if you press CANCEL while the channel
number is flashing.
Quick Program
Quick Program is an exclusive Mitsubishi feature that simplifies the process of
programming your VCR to record. When you press QUICK PROGRAM/VCR
Plus+ on the remote control, you will immediately see the VCR Plus+ system
menu and can begin programming right away.
You can use this feature even when the VCR is stopped, playing, fast forwarding,
rewinding, or off. (Quick program does not work while using OTR
2
.)
Quick Program is also an Active A/V Network feature. If you have a Mitsubishi TV
with Active A/V Network, see page 50 for more information.
1 Press QUICK PROGRAM/VCR Plus+ on the remote control. If the VCR is
off, it will turn on. After tuning your TV to the correct channel or input, VCR
Plus+ system menu will appear.
IMPORTANT
IMPORTANT
If the VCR memory is full, Program memory is full will appear for 3
seconds, and then the Recap screen will appear. Use CANCEL to erase
an entry before you can add another one.
2 Complete steps 3 through 10 in Conventional VCR timer recording.
(See page 28.)
When you have finished, press QUICK PROGRAM/VCR Plus+ again.
If the VCR is stopped, it will turn off and be ready to record your
program at a later time.
If the VCR is playing, recording, fast forwarding or rewinding, the menus
will turn off, but the VCR power will remain on.
3 When you are finished with all programming, check the following:
• If you have a cable box, a digital cable box, a PRIMESTAR
®
or a DISH
Network
™
satellite receiver, leave the cable box or receiver turned ON.
• If your VCR does not control your cable box, leave the box tuned to the
station you wish to record.
• Make sure the VCR is turned OFF and the programmed recording light is
lit before the recording time.
879
0
X
2
ADJUST
ADJUST
ENTER
CANCEL
forward
backward
adjust
213
546
879
0
X
2
QUICK PROGRAM
VCR Plus+
¬VCR Plus+ system
Use number keys to enter
the PlusCode number
--------
or press ENTER to
program.
Press MENU to go back.
¬Program to record
CH DAY ON OFF
§ 2MO11 11:30a 1:30pSP
10TH14 9:00p10:00pEP
7E-WE 8:00a 9:00aEP
S125FR15 5:30p 5:45pEP
8TU19 11:00p 0:30aSP
S980M-F 7:00p 7:15pEP
15SA 2 8:00p 9:00pEP
46SU17 7:00a 9:00aSP
Recap screen
Timer Recording
POWER
213
546
879
0
X
2
STOP
STOP
Programming not cancelled
Programming cancelled