Filter
Top Products
31
Timer Recording
IMPORTANT
IMPORTANT
If you press QUICK PROGRAM/VCR Plus+, but the clock is not set, Set
the clock menu will appear. Set the clock manually.
If you have set the A/V Network to ACTIVE, point your remote control
at the TV when using Quick Program.
VCR Plus+
®
System Programming
The VCR Plus+
®
system allows you to program your VCR to record by simply
entering a PlusCode programming number. You can find this number in TV Guide
or possibly your local TV listings.
1 Load a tape with its erasure prevention tab intact into the VCR.
2 Press MENU. VCR Main Menu appears on your screen. Use the ADJUST
buttons to select Program to record. Press ENTER.
IMPORTANT
IMPORTANT
If the VCR memory is full, Program memory is full will appear for 3
seconds, and then the Recap screen will appear. Use CANCEL to erase
an entry before you can add another one.
If there is at least one programmed recording already entered, the Recap
screen will appear. Wait 4 seconds, and the VCR Plus+ system menu will
appear.
3 VCR Plus+ system menu will appear. Use the number buttons on the remote
control to enter the PlusCode number for the television show you want to
record. For example, if the PlusCode number for the program you want to
record is 5678, simply enter 5-6-7-8. See your local newspaper or TV Guide
for PlusCode numbers.
4 If you enter a number incorrectly, press CANCEL. When you have finished
entering the PlusCode number, press ENTER.
IMPORTANT
IMPORTANT
If the code number you entered is wrong, The PlusCode number is not
valid will display on the screen for 3 seconds, and then the VCR Plus+
system menu will reappear.
5 Use the ADJUST buttons to select whether you want to record your
program once, daily, or weekly.
• Once will record a program one time.
• Daily will record the same channel at the same time, Monday through
Friday.
• Weekly will record the same channel at the same time, on the same day
each week.
After you have made your choice, press ENTER.
IMPORTANT
IMPORTANT
If two programmed recording times overlap, VCR is already programmed
for that time will display on the screen. You will need to erase the
previous program before you can enter the new one.
ªVCR Main Menu
¬Program to record
PrograManager
√Customize choices
»S-VHS Set-Up
ƒFirst Time Set-Up
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬VCR Plus+ system
Use number keys to enter
the PlusCode number
5678----
Press ENTER when done.
Press CANCEL to erase
the PlusCode number.
Press MENU to go back.
¬VCR Plus+ system
PlusCode number:5678
ƒOnce
ƒDaily
ƒWeekly
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select