Filter
Top Products
32
6 Recap screen will appear. The program you have chosen to record will be
highlighted.
The channel number will appear in blue color. Make sure that the correct
channel number is shown on the screen. If the displayed number is not
correct, press INPUT to make the number flash, then press the ADJUST
buttons to correct the channel number. Press the ENTER to complete. “S”
will appear next to the channel number when you select a satellite channel.
7 If you wish to change the record speed, press ENTER repeatedly until the
record speed is flashing. Change the recording speed by pressing the
ADJUST buttons. Press ENTER.
8 To program additional recording times, select an empty program line by
pressing the ADJUST buttons. Press ENTER. You will return to the VCR
Plus+ system menu. Continue the VCR Plus+
®
system programming
procedure from step 3.
9 When you are finished with all programming, check the following:
• If you have a cable box, a digital cable box, a PRIMESTAR
®
or a DISH
Network
™
satellite receiver, leave the cable box or receiver turned ON.
• If your VCR does not control your cable box, leave the box tuned to the
station you wish to record.
• Turn the VCR power OFF and make sure the programmed recording light
is lit.
If you want to stop the programmed recording after it starts, press POWER on
the front panel.
Timer Recording
POWER
¬Program to record
CH DAY ON OFF
§ 2 MO11 11:30a 1:30pSP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
INPUT to correct channel
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
Recap screen