Filter
Top Products
C2602M-C (3/07) 15
To stop the DX4000
1. Press the power button on the front panel of the DX4000 or on the remote control. The unit beeps and displays the Shutdown screen.
2. Press the numbered channel buttons to enter your password, and then press the Enter button. The unit shuts down all attached devices and
then turns off.
Figure 7. Shutting Down the DX4000
CHOOSING A USER ACCOUNT
The DX4000 provides user accounts for an administrator, manager, and operator. Each of these user accounts has different levels of access to the
system. If you attempt to access a protected function, you will be prompted to enter a different user ID and password. Access varies slightly
when you are logged on from the remote agent. The following table describes the access levels for each user account on the DX4000 and from
the remote agent. Note that while logged on to the DX4000 from the web client, the only access that is available is to view live video.
Table A. User Accounts and Access Levels
User Account DX4000 Remote Agent
Operator • View live video
• Change the display
• Control cameras (PTZ, focus, and iris)
• View live video
• Change the display
• Control cameras (PTZ, focus, and iris)
• Adjust color
• Control audio
• Save live video to the local drive
• Change connection settings
Manager • All operator access
• Back up video to CD, DVD, or USB flash memory
• Search for recorded video
• All operator access
• Search for recorded video
• Record live video manually
• Back up recorded video to the hard disk
Administrator • All manager and operator access
• Back up video to CD, DVD, or USB flash memory
• Configure the DX4000
• All manager and operator access
• Back up recorded video to a CD, DVD, or USB
flash memory, or to the hard disk
• Configure the DX4000