Filter
Top Products
C2602M-C (3/07) 25
FACTORY DEFAULT SETTINGS
You can restore the DX4000 to its original factory settings. Restoring the unit to its original factory settings resets all settings. It does not erase
any recorded video from the hard disk drive, nor does it reformat the drive.
1. Press the Menu button on the front panel of the DX4000 or on the remote control.
2. From the main menu, navigate to the System menu, and then select Factory Default. The Factory Default menu appears.
Figure 20. Factory Default Menu
3. Press the Enter button and a warning message appears on the screen. You can select OK and then press the Enter button to reset the unit to
its original factory settings. If you do not want to restore the settings, select Cancel, and then press the Enter button to keep the current
settings.
Figure 21. Factory Default Reset Warning Message