Filter
Top Products
C2602M-C (3/07) 65
Figure 83. PTZ Control Buttons
2. Select the preset number from the Preset list, and then click RUN. The camera adjusts itself to the preset position.
To use Preset 95
Preset 95 displays the camera menu for Esprit and Spectra cameras. You can use this menu to configure settings on these cameras. Follow these
instructions to use Preset 95 and to navigate the camera menus.
1. In single-screen mode, select the camera channel on which you want to run the preset, and
then click the PTZ button on the PTZ controls.
2. Enter or select 95 in the preset list, and then click SET. The camera’s menu appears on the
screen.
3. Navigate through the menu as follows:
• Click the FOCUS button, and then click the + (plus) or - (minus) buttons to navigate through
list of options in a menu or submenu.
• Click the IRIS button, and then click the + (plus) button to select an option.
• Click the IRIS button, and then click the - (minus) button to select the EXIT command on
the menu. Then click the IRIS button followed by the + (plus) button to exit the menu.
4. After you have completed setting up the camera, navigate to the Exit command, click the IRIS
button, and then click + to close the menu.
Figure 84. Using Preset 95