Filter
Top Products
C2602M-C (3/07) 63
To adjust the focus
1. Display live video in single-screen mode on the remote agent main screen.
2. In single-screen mode, select a camera by clicking in the channel video pane or by clicking a camera button at the bottom of the screen.
3. In the remote agent main screen, look for the Focus button on the controls in the lower-right corner of the screen (Figure 77).
4. Click the Focus button, and then click the + (plus) or - (minus) buttons to adjust the focus.
To adjust the iris
1. In single-screen mode, select the camera for which you want to adjust the iris, and then click the PTZ button on the PTZ controls (Figure 77).
2. Look for the Iris button on the PTZ controls.
Figure 78. Adjusting the Iris
3. Click the IRIS button, and then click the + (plus) or - (minus) buttons to adjust the iris.
To set up a pattern
1. In single-screen mode, select the camera for which you want to set up a pattern, and then click the PTZ button on the PTZ controls
(Figure 77). The PTZ buttons expand to display controls for patterns and presets.
Figure 79. Setting Up a Pattern
2. Select pattern number 1 in the Pattern list, and then click START. Only one pattern can be programmed from the remote agent. Always
select pattern number 1.
3. Use the PTZ control buttons to reposition the camera in the desired pattern. You can use any of the following commands:
• Pan the camera to the right or left.
• Tilt the camera up or down.
• Zoom in or out.
• Refocus the lens.
• Adjust the iris by opening or closing it.
4. When you are finished, click STOP. The program is saved in the camera’s memory for future use.