Filter
Top Products
63
RQT9431
DV IN
L/MONO AUDIO R
VIDEO
S VIDEO
AV3 N
Connect to Audio/Video output terminals.
Other video equipment
DV cable
(IEEE 1394, 4-pin)
S Video
cable
Audio/Video
cable
This unit
The S VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
If the audio output of the external device is monaural, connect to
L/MONO on the AV3 input terminals at the front.
If DV cable is connected, the S Video and Audio/Video cable are
not required.
Recording from a VCR, etc.
HDD
Preparation:
Press [DRIVE SELECT] to select the HDD drive.
When the output signal from the external device is
NTSC, change the “TV System” to “NTSC” in the
Setup menu (➔ 101).
•
•
a few times to select the
input where your external device
is connected, then
Select “AV3” for connection with S Video or
Audio/Video cable.
Select “DV” for connection with DV cable.
a few times
to select the
recording mode.
DR, HG, HX, HE, HL, FR mode cannot be
selected.
Start play on the external device.
at the point you want to
start recording.
–
–
–
•
•
Tips
To skip unwanted parts
Press [
h
] to pause recording. (Press again to restart recording.)
To stop recording
Press [
g
].
The confirmation screen appears. Press [OK].
Notes
When timer recording starts while recording from an external
device, timer recording takes priority. Recording from the external
device stops:
When a timer recording from an external device starts.
When another timer recording using this unit’s tuner starts.
If video is copied from another piece of equipment to this unit, then
the video quality will be degraded.
Almost all videos and DVD-Video on sale have been treated to
prevent illegal copying. Any software that has been so treated
cannot be recorded using this unit.
During EXT LINK standby mode or recording, you cannot press
[INPUT SELECT] to select external input other than AV2.
•
–
–
•
•
•
Recording from an External Device
With Other
Equipment