Filter
Top Products
Alignments
EN 40 Q549.2E LA6.
2009-May-08
Audio reproduction Acoustic system Cabinet design used for setting dynamic audio pa-
rameters.
Source selection EXT1/AV1 type SCART CVBS RGB LR Select input source when connected with external
equipment.
CVBS Y/C YPbPr LR
CVBS Y/C YPbPr HV LR
(CVBS) YPbPr LR
EXT2/AV2 type SCART CVBS RGB LR Select input source when connected with external
equipment.
CVBS Y/C LR
(CVBS) YPbPr LR
CVBS Y/C LR
EXT3/AV3 type None Select input source when connected with external
equipment.
CVBS
CVBS LR
YPbPr
YPbPr LR
YPbPr HV LR
VGA Off/On Select VGA On/Off
SIDE I/O Off/On Select SIDE I/O On/Off
HDMI 1 Off/On Select HDMI 1 On/Off
HDMI 2 Off/On Select HDMI 2 On/Off
HDMI 3 Off/On Select HDMI 3 On/Off
HDMI 4 Off/On Select HDMI 4 On/Off
HDMI side Off/On Select HDMI side On/Off
HDMI CEC Off/On Select HDMI CEC On/Off
HDMI CEC RC passthrough Off/On Select HDMI CEC RC passthrough On/Off
HDMI CEC Pixel Plus link Off/On Select Pixel Plus link On/Off
Miscellaneous Region Europe/AP-PAL-MULTI/Australia Select Region/country.
Tuner type HD1816-MK1/TD1716-MK4/
TD1716-MK3/HD1816-MK2
Select type of Tuner used.
System RC support Off/On Select System RC support On/Off.
Embedded user manual Off/On Select Embedded user manual On/Off.
Start-up screen Off/On Select Start-up screen On/Off.
Wallpaper Off/On Select Wallpaper On/Off.
Hotel mode Off Hotel mode is Off.
Option number Group 1 e.g. “08192.02181.01387.45160” The first line (group 1) indicates hardware options 1
to 4.
Group 2 e.g. “10185.12448.00164.00000” The second line (group 2) indicates software options
5 to 8.
Store Store after changing.
Initialise NVM N.A
Store
Select Store in the SAM root menu after making any
changes.
Software maintenance Software events Display Display information is for development purposes.
Clear
Test reboot
Hardware events Display Display information is for development purposes.
Clear
Operation hours display 0003 In case the display must be swapped for repair, you
can reset the ""Display operation hours"" to ""0"". So,
this one does keeps up the lifetime of the display it-
self (mainly to compensate the degeneration behav-
iour).
Test setting Digital info QAM modulation: 64-QAM Display information is for development purposes.
Symbol rate: 23:29
Original network ID: 12817
Network ID:12817
Transportstream ID: 2
Service ID: 3
Hierarchical modulation: 0
Selected video PID: 35
Selected main audio PID: 99
Selected 2nd audio PID: -1
Install start frequency 000 Install start frequency from "0" MHz
Install end frequency 999 Install end frequency as 999 MHz
Default install frequency
Installation Digital only Select Digital only or Digital + Analogue before instal-
lation.
Digital + Analogue
Main Menu Sub-menu 1 Sub-menu 2 Sub-menu 3 Description