Filter
Top Products
04
34
En
Chapter 4
Display
Main unit display
Displaying the playing status
1 Press the LCD button on the main unit’s front
panel.
The main unit display changes as shown below each time
the LCD button is pressed.
1. Frame display (initial display) 2. Time display
3. Repeat/playlist display 4. HDMI/resolution display
5. Video output display 1. Frame display ...
1. Frame display
: Play mode
: Pause mode
: Still picture play mode
2. Time display
3. Repeat/playlist display
4. HDMI/resolution display
5. Video output display
Adjusting the main unit display’s
contrast
1 Press the LCD button on the main unit’s front
panel for over one second.
The display switches as shown below, and the contrast
level changes while the button is pressed.
2 Release the LCD button when the desired
contrast level is reached.
The contrast is set.
Checking error messages
When an error occurs, a message appears, as shown
below.
Example of error message
001OPEN.mpg
0000000
File name (Characters 9 and over are abbreviated)
Status Frame
m0 0000 s00f
001OPEN.mpg
SecondsMinutes Frame
Re
p
eat Of f
Playl ist Off
Playlist display:
Current repeat setting
Off (when not using a playlist)
1 to 20 (when using a playlist)
Off: None
File: Current file only
All: All files
HDMI( On
1920X1080/ 59. 94 i
HDMI video output resolution (page 19)
On: Enabled
Off: Disabled
HDMI connection
Video Out
NTSC
Video output – TV system: NTSC/PAL
C
Min Ma
x
ONTRAST ADJUS
T
EEPROM ERROR