Filter
Top Products
09
60
En
About network functions
The functions below can be used when this unit is
connected to a network (LAN) and the application (HD
PILOT) is used. For details, download the
“Communications Interface User’s Manual” from the
Pioneer website.
Wake Up On LAN
This is a function for turning on this unit’s power via a
LAN. This unit’s Wake Up On LAN setting to must be set
to On (page 48).
FTP
This is a function for transferring video or still picture files
to the SD memory card or USB storage device connected
to this unit via the LAN. To use it, the FTP items at this
unit’s Network Settings setting must be set (page 48).
Remote monitoring
This is a function for monitoring this unit’s status
remotely. To use it, this unit’s Remote Port setting must
be set (page 48).
43 1 1 1 LIST 14
44 1 1 1 LIST 15
45 1 1 1 LIST 16
46 1 1 1 LIST 17
47 1 1 1 LIST 18
48 1 1 1 LIST 19
49 1 1 1 LIST 20
50 1 1 1 RECALL
51 1 1 1 SETUP
52 1 1 1 MEMORY
53 1 1 1 REPEAT
54 1 1 1 FRM/TIME
55 1 1 1 CLEAR
56 1 1 DISPLAY
No. SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 Function